(1) Brush your hair. If your hair is wet, dry it with a towel, hair dryer, or any other method you prefer.
(2) Divide your hair into sections and fix them in place with hair clips.
(3) Plug in the power cord.
(4) Press and hold the Power button for 2 seconds or longer to turn the power on.
The temperature indicator in addition to the "+" and "-" indicators will display a solid white. The set temperature* display indicator will blink red.
* The temperature is set to 180ºC at the time of purchase. The ReFa BEAUTECH CURL IRON will remember the last temperature setting used. The next time you use it, the last temperature you set will blink red. (It will not remember the last temperature setting if you unplug the power cord before the power is turned off).
(5) Press the "+" or "-" button within 5 seconds of turning the power on to set the temperature.
● If no buttons are pressed after more than 5 seconds have passed, the set temperature will be locked, and the lock indicator will display a solid white to show that the temperature setting cannot be changed.
(6) You can start styling your hair when the temperature indicator displays a solid red.
(7) To turn off the power, press the Power button. All the display indicators will go out.
(8) Unplug the power cord. Let the hair iron cool down completely before storing it. Store away from direct sunlight, avoiding places where it will be exposed to high temperatures or humidity (e.g., bathrooms, cars, etc.).
(1) Take a section of your hair about 3 cm in width.
(2) Put the section you want to curl between the clip and the iron pipe with the clip facing outward. Slightly tilt the iron in the direction you want to curl your hair, and put the section in the middle of the iron pipe.
(3) Rotate the iron inward by a half-turn to a full turn.
(4) Grip the clip lever lightly to keep the clip slightly open, and release the hair as you slide the iron downward.
(5) Do steps 1 to 4 on all of your hair. Repeat the steps one by one, working from the bottom layer of the section.
(1) Take a section of your hair about 3 cm in width.
(2) Put the section you want to curl between the clip and the iron pipe with the clip facing inward. Slightly tilt the iron in the direction you want to curl your hair and put the section in the middle of the iron pipe.
(3) Rotate the iron outward by a half-turn to a full turn.
(4) Grip the clip lever lightly to keep the clip slightly open, and release the hair as you slide the iron downward.
(5) Do steps 1 to 4 on all of your hair. Repeat the steps one by one, working from the bottom layer of the section.
